Red, Flexible TPU Filament 1.75mm 0.8kg/1.76lb –

4.5

(427)

Scrivi Recensione

Di più

€ 17.00

Nel carrello

quantità

In Magazzino

Descrizione

OVERVIEW SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber.95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. SPECIFICATION - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant- Shore Hardness: 95A- Weight: 1 KG (approximately 2.20 lb) Spool Weight Total, Net Weight 0.8 KG- Diameter: 1.75mm (+/- 0.05mm)- Recommended extruder temperature:195 - 230°C- Recommended platform temperature: 40 - 60°C PRINTING TIPS Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.With bowden extruder you might pay more attention to these tips:- Print slow 15-30 mm/s Printing speed- First layer settings. (Height 100% Width 150% speed 50% e.g.)- Retraction disabled. This would reduce messy, stringing or oozing
High strength but flexible. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Resistant to oil, grease and abrasions. Widely used in many applications. Such as power tools, sporting goods, medical devices, drive bel

SPECIFICATION * Material: Rep-Flex TPU - Vacuumed Sealed with desiccant * Shore Hardness: 95A * Weight: 1 KG (approximately 2.20 lb) Spool Weight