【IEEE802.3af/IEEE802.3at COMPLIANT】This 802.3at POE injector is used to power IP enabled products, like IP cameras, IP phones, Ethernet switches and other audio and video, data communications products etc. It is equipped with 1 PoE RJ45 Port and 1 Uplink Port at Gigabit 10/100/1000Mbps each. Delivers power up to 100 me
EPA5006GAT 802.3at/af Gigabit Power-over-Ethernet Adapter
PSE-M01-GD030: POE Single Port Injector 30W at Rs 2800/unit, PoE Adapter in Navi Mumbai
The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.
30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE
☑️【30W Gigabit PoE Injector】Compliant with IEEE802.3af/at, the poe adapter provides 1 Gigabit Ethernet input port and 1 PoE / PoE+ Gigabit Ethernet
YuanLey Gigabit PoE Injector 30W, PoE+ Injector Converts Non-PoE to PoE+, Power Over Ethernet Injector 48V IEEE 802.3at/af, 10/100/1000Mbps PoE
30W Gigabit Single Port Power Over Ethernet PoE Injector, 802.3at PoE
30W Gigabit Single Port Power Over Ethernet PoE Injector, 802.3at, poe injector
DIGITUS by ASSMANN Shop Gigabit Ethernet PoE+ Injector, 802.3at, 30 W
Tripp Lite Gigabit Ethernet PoE/PoE+ Extender - Cat5e/6/6a, RJ45, IEEE 802.3at/af, 30W, 1 Port, 328 ft. (100 m) - - NPOE-EXT-1G30 - Network Cables
StarTech.com Industrial Gigabit Ethernet PoE Injector 30W 802.3at PoE Midspan 48V 56VDC Power Over Ethernet Injector Adapter 40C to 75C Industrial Gigabit Ethernet PoE Injector Power over Ethernet Injector - Office Depot
Planet POE-176-95 Single-Port 10Gbps 802.3bt PoE++ Injector (95 Watts, 802.3bt - Network Camera Store
The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.
30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE
Gigabit Power Over Ethernet PoE+ Injector 30W Plug & Play Up to 328Ft. PoE Injector. PoE Switch. 5 Port Gigabit PoE Passthrough Switch Outdoor
Gigabit PoE Injector 30W ethernet 48V IEEE 802.3at/af Up to 100M for CCTV Camera
The Intellinet 1-Port Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 W. That's enough for even power-hungry PoE devices.
Intellinet 560566 1-Port Gigabit High-Power PoE+ Injector
Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.
Tripp Lite NPOE-30W-1G Gigabit Midspan PoE+ Injector Active IEEE 802.3at/802.3af
STCPOEINJ1G StarTech 1 Port Gigabit PoEPlus Power over Ethernet Injector 48V / 30W, 802.3at / 802.3af, Wall-Mountable