Accessory Compatibility Recommended Not Recommended Build Plate Cool Plate, High Temperature Plate or Textured PEI Plate Engineering Plate Hotend All Size / Material / Glue Bambu Liquid Glue Glue Stick / PLA Matte Hex Code Table Color Hex Code Display Ivory White #FFFFFF Latte Brown #D3B7A7 Desert Tan #E8DBB7 Ash Gray #9B9EA0 Lilac Purple #AE96D4 Sakura Pink #E8AFCF Mandarin Orange #F99963 Lemon Yellow #F7D959 Scarlet Red #DE4343 Dark Red #BB3D43 Dark Brown #7D6556 Dark Green #68724D Grass Green #61C680 Ice Blue #A3D8E1 Marine Blue #0078BF Dark Blue #042F56 Charcoal #000000 RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C,8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Accessory Compatibility Recommended Not Recommended Build Plate Cool Plate, High Temperature Plate or Textured PEI Plate Engineering Plate Hotend All Size / Material / Glue Bambu Liquid Glue Glue Stick / PLA Matte Hex Code Table Color Hex Code Display Ivory White #FFFFFF Latte Brown #D3B7A7 Desert Tan #E8DBB7 Ash Gray #9B9EA0 Lilac Purple #AE96D4 Sakura Pink #E8AFCF Mandarin Orange #F99963 Lemon Yellow #F7D959 Scarlet Red #DE4343 Dark Red #BB3D43 Dark Brown #7D6556 Dark Green #68724D Grass Green #61C680 Ice Blue #A3D8E1 Marine Blue #0078BF Dark Blue #042F56 Charcoal #000000 RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 °C,8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 - 230 °C Bed Temperature (with Glue) 35 - 45 °C Printing Speed < 300 mm/s Physical Properties Density 1.31 g/cm³ Vicat Softening Temperature 63 °C Heat Deflection Temperature 58 °C Melting Temperature 163 °C Melt Index 39.4 ± 3.2 g/10 min Mechanical Properties Tensile Strength 30 ± 5 MPa Breaking Elongation Rate 14.8 ± 4.2 % Bending Modulus 2360 ± 250 MPa Bending Strength 53 ± 6 MPa Impact Strength 19.2 ± 3.7 kJ/m² Downloads Filament TDS Filament MSDS Filament RoHS Printing Tips • Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI. What's in the Box: Filament*1 & Desiccant*1 Instructions*1 & Spool Sticker*1 Package*1 Filament Label*1 Print Your Own Spool Now Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files! 2.If you don't have the spool model in your printer, please click here to download. Instructions for Printed Spool When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x). Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll. Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece. Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock. Step 1. Make sure the spacing shim is installed inside the spool (under the triangle). Step 2. Tear apart and pull out the plastic strips. Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.
Accessory Compatibility
Recommended
Not Recommended
Build Plate
Cool Plate, High Temperature Plate or Textured PEI Plate
Engineering Plate
Hotend
All Size / Material
/
Glue
Bambu Liquid Glue Glue Stick
/
PLA Matte Hex Code Table
Color
Hex Code
Display
Ivory White
#FFFFFF
Latte Brown
#D3B7A7
Desert Tan
#E8DBB7
Ash Gray
#9B9EA0
Lilac Purple
#AE96D4
Sakura Pink
#E8AFCF
Mandarin Orange
#F99963
Lemon Yellow
#F7D959
Scarlet Red
#DE4343
Dark Red
#BB3D43
Dark Brown
#7D6556
Dark Green
#68724D
Grass Green
#61C680
Ice Blue
#A3D8E1
Marine Blue
#0078BF
Dark Blue
#042F56
Charcoal
#000000
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Recommended Printing Settings
Drying Settings (Blast Drying Oven)
55 °C,8 h
Printing and Keeping Container's Humidity
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature
190 - 230 °C
Bed Temperature (with Glue)
35 - 45 °C
Printing Speed
< 300 mm/s
Physical Properties
Density
1.31 g/cm³
Vicat Softening Temperature
63 °C
Heat Deflection Temperature
58 °C
Melting Temperature
163 °C
Melt Index
39.4 ± 3.2 g/10 min
Mechanical Properties
Tensile Strength
30 ± 5 MPa
Breaking Elongation Rate
14.8 ± 4.2 %
Bending Modulus
2360 ± 250 MPa
Bending Strength
53 ± 6 MPa
Impact Strength
19.2 ± 3.7 kJ/m²
Downloads
Filament TDS
Filament MSDS
Filament RoHS
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box:
Filament*1 & Desiccant*1
Instructions*1 & Spool Sticker*1
Package*1
Filament Label*1
Print Your Own Spool Now
Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!
2.If you don't have the spool model in your printer,
please click here to download.
Instructions for Printed Spool
When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.
GIANTARM Matte PLA, 1.75mm PLA Filament, 1KG Spool(2.2lb), Vacuum Packaging, 3D Printer Filament for Bambu Lab (Matte Terracotta) : Industrial & Scientific
Bambulab PLA Matte filament. The last 5 days with support. Clearly Impurities in filament. : r/BambuLab
Spectrum PLA MATTE Bahama Yellow - 3DJake International
PLA Matte Bambu Lab Global
Bambu Lab Filament: A Comprehensive Guide to Quality 3D Printing — Modern Makes
Problem with Bambu Lab Matte Filament above Normal Speed Setting : r/BambuLab
Bad adhesion with PLA on Wham Bam page : r/BambuLab
Bambu Lab PLA Matte Charcoal
GIANTARM Matte PLA, 1.75mm PLA Filament, 1KG Spool(2.2lb), Vacuum Packaging, 3D Printer Filament for Bambu Lab (Matte Stone Grey) : Industrial & Scientific