NEMA 17 Stepper Motor 76oz 2a 1.8 Deg 5mm Shaft Molex Connector

These NEMA 17 stepper motors are direct replacements for the Rostock MAX kits as well as the ORION.  They come with 750mm long wires with pre-installed locking connectors to directly plug into the RAMBo boards or a 4 pin non shrouded connector with .1" spacing, 5mm shafts that are 22mm long with a flat on the shaft for

These NEMA 17 stepper motors are direct replacements for the Rostock MAX kits as well as the ORION.  They come with 750mm long wires with pre-installed locking connectors to directly plug into the RAMBo boards or a 4 pin non shrouded connector with .1 spacing, 5mm shafts that are 22mm long with a flat on the shaft for better holding of the timing pulleys.  76oz in. of torque and 300mm long wire leads with a 4 pin non locking connector already installed.

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm(63.74oz.in). It's very good choice for 3D printer.

STEPPERONLINE 3D Printer NEMA 17 Stepper Motor 1.7A 64oz.in 4 Wire 1m Wire w/Molex Connector

OpenBuilds NEMA 17 Bipolar Stepper Motor 76 oz-in - RobotShop

STEPPERONLINE Stepper Motor NEMA 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC

STEPPERONLINE 3D Printer Nema 17 Stepper Motor 1.7A 64oz.in 4 Wire 1m Wire W/Molex Connector : Industrial & Scientific

Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector - 17HS16-2004S1 - Nema 17 - 42 x 42mm - This is one of the most

Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector - 17HS16-2004S1|STEPPERONLINE

Nema17 Pancake stepper 25mm - Bondtech

Nema-17 Stepper Motor – Elektor

OpenBuilds NEMA 17 Bipolar Stepper Motor 76 oz-in - RobotShop

NEMA 17 1.8° 2-phase Stepper Motor for 5mm pulley RepRap Prusa 3D printer CNC